[gallery]Style and Glass: Begian strong; trappist, tulip, wine
ABV, Volume & Calories: 9.2 % in 22 fl oz. estimated at 400 C
Purchased at: Super Saver, Pennington, NJ for $8.99

Aroma: very nice, spicy, aromatic, smooth, fruity, delicious. 9 out of 10.

Visuals: nice packaging, copper, golden, hazy, unfiltered, thin white head, loose lace. 4 out of 5.

Taste: almost balanced, medium malt, heavy hops, surprising, great strength, high craft. 9 out of 10.

Palate: high quality, rippled texture, long bright finish. 5 out of 5.

Overall: Done in the tradition of Houblon Chouffe Dobbelen IPA Tripel, where the hops and bananas all get in bed together. Definitely a repeat, though maybe not a favorite, okay value, high craft. 18 out of 20.

Description:
Stock Photo of De-focused shimmering dots in Festive Christmas colours, created in-camera with a wide open aperture and a seriously de-focused lens, great background or texture for festive design element.

Keywords:
background, blur, christmas, colourfull, de, design, dots, element, festive, focus, focused, glitter, glow, glowing, gold, layer, light, overlay, red, round, shimmer, silver, smooth, soft, sparkle, texture, xmas,

© Photographer: Pdtnc | Agency: Dreamstime.com

Types of skin

Before starting any thing about skin care we should first check what skin type we are having. Knowing skin type is the chief way that one can ensure there skin feels and looks its best. There are five basic skin types.

Normal skin

It has a proper balance between oil and moisture. So this skin type does not feel dry or oily ,after washing a face the skin feels smooth and comfortable ,at midnight also its looks fresh and clean . In this type of skin tone pores are visible but not large or clogged

Dry skin

It feels dry to touch and there pores are very fine. It has a dry parched appearance and has a tendency to flake easily. It is prone to wrinkles and lines. Dry skin has a thin and papery texture .After a wash it feels tight, after some time flaky patches appear.

Oily skin

As it’s clear by the, oily skin is slightly too moderately greasy. it feels very greasy. The texture is often very thick and coarse. It is large, visible pores.
After a wash it feels fine. After some time it looks shiny.

Combination skin

This type skin has a few dry patches and a few oily patches. Dryness is usually on the cheeks and oiliness is usually on the T-zone. After a wash some areas feel dry and some areas smooth. After some time the T-zone is shiny.

Sensitive Skin Type

This type of can be easily irritated .It has a fine texture and is very sensitive to changes in the climate. This type of skin has typical reactions like itching, burning, chafing and stinging .After a wash it feels dry and itchy in places. After some times there are flaky patches and some redness.

A smooth compilation mixed to perfection by the Cola Kid.

The Cola Kid – Smooth Funk Mix (1975-1983)

1. Risin’ to the top – Keni Burke (1982)
2. Hold tight – Change (1981)
3. Never too much – Luther Vandross (1981)
4. This one’s on me – Gene Dunlap (1981)
5. Warm weather – Pieces of a dream (1981)
6. Keepin’ love new – Howard Johnson (1982)
7. Get down Saturday night – Oliver Cheatham (1983)
8. The one in my dreams – Breakwater (1980)
9. Younger than me – Gwen Guthrie (1983)
10. Inside my love – Minnie Ripperton (1975)
11. How long – Thelma Jones (1978)
12. And the beat goes on – Whispers (1980)

Download album here:

http://www.mediafire.com/download.php?vxhnmolyzwt

http://www.fotolog.com/lara46

HAS NOT BEEN CODED

HAS NOT BEEN CODED

"Kalau syg dapat cw lain yang syg suka, lebih baik putusin aja aku, ku gak mau diduakan"

kalo gak salah sih dia bilang gitu, pokoknya intinya kayak gitu. sebenarnya aku suka A bilang gitu, agak ngancam-ngancam dikit gitu. Tu kan artinya dia sayang aku plus dia masih bisa berpikir jernih masalah hubungan kami. Kata-kata A kalau dalam lagu bisa seperti lirik dibawah ini nih, lagunya Rob Thomas - Smooth:

And it's just like the ocean under the moon
Well that's the same as the emotion that I get from you
You got the kind of lovin' that could be so smooth yeah,
Give me your heart
Make it real
Or else forget about it

A, pegang ja kata-kataku aku cuma sayang kamu, mau percaya atau gak. cintaku bukan cinta main-main, setidaknya itu yang kurasakan sekarang. Sama seperti kamu, aku tidak akan melarang kamu jatuh cinta ma orang lain, tapi ketika kamu melakukannya... kurasa itu saatnya mengucapkan selamat tinggal.

Nesta segunda parte do artigo, vamos aprender como utilizar Multires na preparação da malha para esculturas e também vamos ver como carregar os pincéis de transparências diretamente para dentro do Blender. Vamos utilizar como modelo a Suzanne, a cabeça de macaco que é uma geometria primitiva do programa e também uma espécie de mascote do Blender. Acredito que utiliza-la neste exercício, irá beneficiar as pessoas que não possuem nenhum modelo pronto no computador, para que possam também acompanhar este pequeno tutorial.

Recomendo que antes de iniciar o exercício, você salve em seu disco os arquivos dos pincéis que foram publicados na primeira parte deste artigo.

1 - Abra o Blender. Pressione a tecla X e apague o cubo default. Em seguida pressione a Barra de Espaços e escolha Add/Mesh/Monkey para carregar a cabeça da Suzanne. Veja na figura abaixo:

[caption id="attachment_383" align="aligncenter" width="450" caption="Geometria Primitiva Monkey (Suzanne)"][/caption]

2 - Pressione a tecla Tab para entrar em Object Mode, na aba Link and Materials do painel Editing (F9), pressione o botão Set Smooth para suavizarmos um pouco nossa malha.

[caption id="attachment_385" align="aligncenter" width="450" caption="Painel Editing Set Smooth"][/caption]

3 - Para podermos testar nossos pincéis neste modelo, teremos que subdividi-lo muitas vezes. Ainda no painel Editing, vá até a aba Multires (Multiresolução). Clique em Add Multires e nos parâmetros que se abrem, clique no botão Add Level. Quanto maior a quantidade de níveis de Multires, melhor será a qualidade dos relevos pintados na malha, mas recomendo uma certa cautela ao utilizar este recurso, clique a primeira vez e deixe o computador processar, depois vá adicionando um nível de cada vez. Um número muito elevado de níveis poderá travar seu computador, pois o recurso exige muita capacidade de processamento. Vou trabalhar aqui com Level 5, que será suficiente para realização desse exercício.

4 - A figura abaixo, mostra a aplicação de Multires no modelo com Levels 5. Note, que o modelo agora tem a superfície bem suavizada e está pronto para a execução de nosso exercício:

5 - Com a malha ainda selecionada, entre em Sculpt Mode. A primeira coisa a fazer será carregar os 6 pincéis para dentro do Blender, para que possamos trabalhar mais livremente (...é claro que normalmente você só irá carregar os pincéis de que necessitar, mas lembre-se que estamos apenas exercitando esta prática).

No painel Shading (F5) clique no botão Material Buttons e na aba Links and Pipeline escolha Add New, para adicionarmos um novo material ao objeto.

6 - Em Texture Buttons (F6), na aba Preview escolha a última opção Brush, para carregar a textura como um pincel e não como um material. Na aba Texture ao lado, selecione o primeiro slot vazio e clique em Add New.

[caption id="attachment_420" align="aligncenter" width="450" caption="Texture Buttons/Brush"][/caption]

7 - Em seguida, nos parâmetros de Texture Type escolha Image. Na aba Image que irá se abrir, clique em Load, procure o diretório onde você salvou os arquivos e carregue o primeiro pincel de seu disco.

[caption id="attachment_426" align="aligncenter" width="138" caption="Texture Type/Image"][/caption] [caption id="" align="aligncenter" width="450" caption="Texture Type/Load Image"][/caption]

A imagem do pincel irá aparecer no Preview à esquerda. Veja na imagem:

8 - Para carregar os demais pincéis, repita o mesmo procedimento para cada um deles, sempre selecionando um slot vazio para cada um. Feito isso, o recomendado é renomear cada um deles em seus devidos slots para que o trabalho fique mais organizado,... veja no exemplo os 6 pincéis carregados cada um em seu slot diferente e já devidamente renomeados:

Salve seu arquivo para poder acompanhar a terceira parte deste artigo onde veremos na prática, a aplicação dos Alpha Brushes utilizando a Suzanne como modelo. Mas você não precisa esperar,... o modelo está pronto para receber os pincéis,... pode brincar à vontade. Pressione a tecla N enquanto no Sculpt Mode, para abrir as propriedades e teste os pincéis Draw ou Inflate com valores Add e Sub com pressões diferentes (Strength) e veja também os tres eixos de Symmetry. Teste o pincel Smooth na suavização de superfícies muito enrugadas e aproveite para rever os atalhos de teclados e exercitar sua aplicação (vide artigo Basic Sculpt Mode/Short Cuts).

Congratulations.  Thank You to Clare and Becky for a wonderful Wedding Day.  I would also like to Thank The Cecil and Karb families along with all family friends for making this destination ceremony amazingly smooth and for your wonderful attitudes during the 3-4 day event.  ~ :)

What to expect from...

Installation of Prefinished Floors

A basic definition of prefinished flooring is when the boards that are to be installed already have finish on them. In fact, most companies put from 5-9 coats of finish on their prefinished wood.

Prefinished Hardwood floors are quite popular right now, because they have many advantages over the alternative, site-finished floors:

1. During installation, you skip all the dusty mess that goes along with sanding
2. The boards are already finished, so as soon as they are down you can walk on them. No waiting for the horrid-smelling finish to dry.
3. Since the boards are finished in a factory and have 5-9 coats, the finish is very hard, smooth, and durable.
4. Because sanding and finishing is skipped, a prefinished floor can be installed in half the time, saving you money on labor.

There are, however, a few disadvantages to prefinished floors:

1. Borders, inlays, and other fancy flooring tricks are hard or impossible for the installer to do, because they usually require sanding.
2. When boards are cut in the factory, the heights and thicknesses can vary by up to 1/32nd of an inch. Because of this, in order to avoid sharp edges, all prefinished boards are beveled on all sides. This creates grooves between every board, and accentuates the seams (note: Some people like this look, but few like the feel on their bare feet).
3. The wood is more expensive (although since you save money on labor, your ending price is usually very similar to the price of site-finished).

For most people, the only disadvantage to prefinished flooring is #2. Since the floor is not sanded after it is installed, there will be unevenness that the installer has no control over.

What to expect from the finished product.

Nail holes/heads. The installer should set all nails and fill all holes. As a result, there should be no visible nail heads or nail holes. However, if you kneel down and look closely, you should be able to find where the nail holes used to be, because no wood filler (or wood putty) can be a perfect match to a wood grain.

In addition, there should only be a few nail holes in most floors. In fact, most of the time, a simple, square room can be installed without any nail holes at all. However, keep in mind that many situations will require a board to be top-nailed, resulting in nail holes.

Cracks and Creases. Any time a board comes together with another board, it forms a crease. These creases are what make hardwood floors look how they do. On a prefinished floor, these creases are much more pronounced, because the edges of each board are beveled down at about a 45-degree angle. there is nothing the installer can do about these bevels, except to sand down the whole floor and refinish it, which negates the purpose of a prefinished floor, and is not the installers responsibility (In other words, you would have to pay extra for it (probably at least $2.50 per square foot extra)).

When you look at a hardwood floor, there are the creases that go along the length of the wood, and go all the way across the floor (with the grain), and there are small creases in between boards in the same row (against the grain). The smaller creases, as a rule, should be evenly distributed around the floor, with none coming within 6 or 8 inches of each other. Seams that are close together, or clumped in one area, leaving another area seamless, are the signs of a poor installation job. They are not, however, a good enough reason to demand that your floor be ripped up and reinstalled at the installers expense. Usually in those cases, you have hired a very inexpensive installer, and you got what you paid for. If it is a big deal to you, you might talk about getting the floor redone at a discounted cost.

Any crease in a wood floor has a chance of becoming a crack, for various reasons. One may be a milling imperfection in some of the boards (such as one board being slightly thinner than another is). Expansion and contraction may be another reason. In general, wood will expand in the summer and contract (shrink) in the winter. This causes gaps to open up between boards. It is not always good to fill these cracks, because when the boards expand again, it could push the filler out, or even buckle the wood.

On the other hand, cracks that are caused by milling imperfections or installation mistakes/problems should be filled by the installer (with the possible exception of smaller cracks if significant expansion is expected after the installation).

After installation, there should be (in most cases) no visible cracks when viewed semi-casually from a standing position (and without a magnifying glass, please).

Scratches, gouges and other surface problems should not be visible when the installer is done. If the board was damaged when it arrived at your house, the installer should not have installed it. If it happened after the installation, but the damage was caused by the installer, he/she is responsible to fill it, fix it, or replace the boards affected. If, however, the damage is caused by another contractor or worker, or any residents or guests in the house, the installer is not responsible to fix it, and is perfectly within his/her rights to charge extra if you want it fixed (However, charging extra to fix one small scratch that he/she can fix in two minutes, may be considered a little rude).

Expansion Gaps. Because wood expands and contracts (due mostly to changing humidity and temperature), installers will leave expansion gaps between the wood and everything else (walls, other floors, etc.). In general, these gaps are between 1/4 inch and 1/2 inch. This can create a problem sometimes on remodeling jobs, especially in kitchens.

Many houses do not have any trim (or baseboard) around the bottom of the cabinets in the kitchen. When wood floors are installed in these conditions, there will be a visible, ugly expansion gap left over. The homeowner should work with the installer to select (and pay for) baseboards, trims, or caulk solution.

Baseboards. It is common for the installer to remove and reinstall baseboards when he is hired to install a floor (for a price that should be included in the estimate). This can sometimes cause problems with older baseboards. The installer is responsible for any damage done to the baseboards due to his/her own negligence or hurriedness. The installer is not responsible for any damage that already existed, or that occurred because of the brittle state of the baseboards or excessive fastening to the wall (i.e. too many nails and/or glue). Be prepared to deal with at least one broken piece of baseboard. Many times the damage can be fixed with a little painter's caulk and a coat of paint, so do not get too broken up about it.

In conclusion, please remember that it is a floor and it is meant to be walked on. If you get down on your hands and knees and study the floor, you will find cracks, holes, scratches, and many other imperfections. When inspecting a floor, it should be done from a standing position in normal light. If you can see problems from that position, that is when you should point them out to the installer. People who refuse to pay because of common imperfections that are expected in wood floors are setting themselves up to be blacklisted or overcharged by other contractors in the future. Nobody wants to deal with an unreasonable customer.

To find a qualified professional who can complete this for you and much more, the best place to go is Repairfinders.com. On repairfinders.com you will find dozens of listings in your area, that are hardworking, honest, and reliable. Check it out today and don't forget all the businesses listed offer free quotes!

Wallpaper High Quality 1600x1200

The feet tread on the photographs of their life.  The photographs contain every friend, every brother, sister, parent and extended family member, every birthday party, every funeral, every breakup, all the weddings ever attended and their own wedding; everything that ever happened to them or that they caused.  It’s dreamlike.  The feet are walking on this huge beach but instead of sand it’s the photographs.  And the sea contains all the emotions ever felt by them, hate, anger, love, acceptance, grief, fear, joy, ecstasy, guilt, happiness, excitement, the wonder of a first child – every emotion.  It’s surreal.  In the distance is a mountain.  The sun is setting but the air is still warm, as though it’s the middle of the day.  The feet started at the farthest end of the beach, a small jut out into the sea at first the only photographs only showed a blurry mom and dad and an occasional grandma or aunt.  Then the photographs showed a brother and sister and cousins.  The feet are nearing the mountain now.  The mountain contains eternal peace.  The feet stop at the mountain base for a moment.  The photographs now show kids, nieces and nephews, grandkids and great grandkids.  The feet which started out smooth and unwrinkled now hobble along looking like raisins.  And yet there is still a certain dignity in the tread.  The feet have often stumbled, even fallen but they’ve never given up.  They begin to climb that final mountain, earning every inch.  They reach the top and now it begins.  Now it ends.

Fantástico como complemento aos tratamentos semanais.

Concede brilho, sedosidade e extrema hidratação. Possui ph 4.0, e seu tempo de ação é de 30 segundos. Hiper rápido e prático.

Preço médio por unidade de 15 ml: R$ 15,00.